Humbaur 3000 Series страница 51 Скачать руководство пользователя

Страница: 51 / 106

Drop sides

MACHT’S MÖGLICH

Load securing / Operating the body

Opening and closing drop sides / locks

The drop sides enable form-fitting load securing.

Driving with unlocked or partly removed drop sides
is not permitted by law.

Drop sides are heavy!
Fitting / removal of the drop sides requires 2
persons.

Note / comply with the following without fail when handling:

– Stand to one side of the drop side before releasing the

tension locks.

– Only open or close the drop sides if the cargo bed is

horizontal.

– Release the tension locks in turn and hold the drop side

tightly at the same time.

DANGER

Driving with open drop sides / stanchions

People may be caught and dragged along.
The load could fall off - accident risk!



Before setting off, make sure that all drop sides have
been closed, inserted and secured.

WARNING

Driving with partly removed drop sides

The drop sides cannot be secured - accident risk!



Only drive with all the drop sides attached or with the
drop sides completely removed.

WARNING

Unsecured tension locks

The drop side could open while driving – accident
risk!



Check that all tension locks are secured with locking
springs before driving off.

CAUTION

Opening and closing drop sides and locks

Fingers / hands could be crushed when opening /
closing drop sides and locks - risk of crushing!



Use .



Fold the drop sides down in a controlled way - do not
allow them to fall down.



Do not touch a drop side you intend to latch directly in the
area where the drop side stanchions / locks are.



Close the hand lever with a flat hand.

CAUTION

Drop sides under pressure from a load

The drop sides could fly open when they are being
opened - impact risk!



Check to make sure that the goods are not pressing
against the drop side before unlatching the drop side
locks.



If required, reposition the load beforehand.



Stand to the side when opening the drop side - outside
the swinging range.

CAUTION

Removed drop sides

Removed drop sides could become an obstacle -
trip hazard!



Do not place removed drop sides directly in the area
required for loading and unloading.



Lay the drop sides flat on the ground - do not place them
on end.

Содержание 3000 Series











































































































Результаты поиска

Содержание 3000 Series

Отзывы:

Похожие инструкции для 3000 Series

Бренды по названию

Популярные бренды

Humbaur 3000 Series, Руководство по эксплуатации

Результаты поиска

Содержание 3000 Series

Отзывы:

Похожие инструкции для 3000 Series

Бренды по названию

Популярные бренды