manualshive.com logo in svg

Humbaur 3000 Series, Руководство по эксплуатации

Поделиться
Скачать
Humbaur 3000 Series Скачать руководство пользователя страница 27

3

Uncoupling / Parking

25

MACHT’S MÖGLICH

Operation

Uncoupling the trailer

In the rear tipper, the wheel chocks are attached to the side 
of the chassis in the front section of the trailer as standard.

WARNING

Unsecured wheel chocks

Unsecured wheel chocks could fall off while driving - risk of 
accidents!

Check that the wheel chocks are secured before driving 
off.

Check the holders for damage at regular intervals.

WARNING

Incorrectly uncoupled trailer 

The trailer could start moving and tip over. 
People could be struck by the trailer and run over - 
risk of crushing!

Only uncouple the trailer when it is empty.

Use wheel chocks to secure the trailer from rolling away 
before uncoupling.

Wheel chock secured

Fig. 4

Wheel chock in the holder

1

Wheel chock

2

Holder

Wheel chocks must always be available. Replace 
any lost or damaged wheel chocks immediately.

Manual manoeuvring of the trailer

Fig. 5

Manual manoeuvring of the trailer

1

Hand brake

2

Jockey wheel

In addition to the parking brake, the trailer must be 
secured with wheel chocks on slopes / gradients 
and when uncoupled.

Use .

Pull / push the trailer in the desired direction.

Ensure that your feet do not get under the jockey wheel.

Park the trailer on level ground / an even surface 
wherever possible
- not on a slope or on an uphill / downhill incline.

Apply the handbrake.

B - 004 

1

2

B - 006

1

2

Содержание 3000 Series











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды