Humbaur 3000 Series, Руководство по эксплуатации

Страница: 60 / 106

Using the trailer as a flat-bed
5
58
MACHT’S MÖGLICH
Load securing / Operating the body
Putting on the drop side
Fig. 27 Putting on the drop side
1 Drop side
2 Drop side hinge

Hold the drop side (Fig. 27 /1) lengthwise approximately
in the middle.
 Slide the drop side onto the drop side hinges (Fig. 27 /2)
in a horizontal position.
Securing / closing the drop side
Fig. 28 Folding up the drop side
1 Securing split pin
2 Drop side hinge
3 Drop side
WARNING
Unsecured hinges / drop sides
The drop side could slide off / drop off the hinges when it is
folded down - risk of impact / crushing!
 Before handling the drop side, ensure that it has been
secured in one of the hinges with a securing split pin.
 Replace any damaged / worn securing split pins.
 Push the securing split pin (Fig. 28 /1) into one of the
drop side hinges (Fig. 28 /2)
- spread the securing split pin slightly.
Replace any damaged securing split pins.
 Fold up the drop sides (Fig. 29 /1).
Tension locks (Fig. 29 /2) must have been opened,
- see “Folding up the front drop side” on page 51,
- see “Folding up the side drop side” on page 52,
- see “Folding up the rear drop side” on page 54.
Locking the drop side
Fig. 29 Drop sides secured
1 Front drop side
2 Side drop side
3 Tension lock
4 Rear drop side
 Lock all drop side tension locks (Fig. 23 /3).
- see “Locking the tension lock” on page 50.
The drop sides (Fig. 29 /1/2/4) have been closed and
secured.
A - 074
2
1
A - 022
2
3
1
A - 023
1
2
3
4