Humbaur 10000 Series, Руководство по эксплуатации

Страница: 74 / 230

72 Operating the chassis
Automatic lowering system
4
Operating the lowering system
Pic. 21 Lowering system operating point
1 ON / OFF switch
2 Sticker
The automatic lowering function is
activated when the loading bridge is
tilted.
The chassis is stabilised.
The automatic lowering function can be
optionally installed with a switch on the
chassis for manually switching off, e.g.
for use with a road paver.
The lowering device is switched on or of
at an electrical switch (Pic. 21 /1):
– Switch position "0": The automatic
lowering system is switched off, the
air-suspension remains at driving
height.
– Switch position "I": The automatic
lowering system is switched on.
When the lowering system is switched on
/ activated, the lowering process is
automatically initiated by raising the
tipping platform.
The axle assembly / the air-suspension
retains the driving level when the
lowering device is switched off /
deactivated.
NOTICE
Activated lowering device in road
paver operation
The air-suspension would automatically
lower the tipping platform and damage
the road paver.

Deactivate lowering (position: (0)
OFF) when working with a road paver.
WARNING
Perform the tipping process
with the lowering device
deactivated
The trailer might fall over during
the tipping process - risk of
crushing / impact!

Only perform the tipping process
when the automatic lowering system
is activated - Set the switch to (I) ON.

Take note that the chassis is lowered
when the tipping platform is raised.

Check that no persons remain
in the danger zone.
P - 024
1
2