Humbaur 10000 Series, Руководство по эксплуатации

Страница: 32 / 230

2
HTK product description
30 General information
Specifications for HTK 19 t - three-way tipper
The HTK is a bulk goods transporter with
a rigid central pipe drawbar.
The pipe drawbar is supported at the
front, using a reinforced spindle support
with a load capacity of up to 12 t.
The HTK 19 t - three-way tipper has a
load capacity of up to 15,000 kg
(standard equipment).
The HTK 19 t as a tandem trailer comes
equipped with low-maintenance air-
suspension as well as optionally with an
instant lowering device for tilt
stabilisation.
The (Hardox) HB 450 steel drop sides
can be provided with a height of 800 mm,
900 mm or 1000 mm.
The side drop sides can be optionally
made from aluminium.
The standard platform floor is 4 mm thick.
It is optionally available in 5 mm or 6 mm
wear-resistant steel.
The 3-stage telescopic cylinder can be
used to tilt the cargo bed backwards or to
either side, up to an angle of approxi-
mately 50°.
The hydraulic pipe is connected to the
towing vehicle via the SVK BG3
hydraulic quick connector.
The side and rear drop sides have a
central locking system for swing
operation.
The rear drop side is fully automatically
unlocked during rear tipping.
The HTK 19 t is optionally available as a
multi-voltage vehicle with LED lighting
and a brake system.
The underride protection can be
manually folded in.
Optional additional equipment:
– A-label for waste transport
– Rear marker panel conforming to
ECE R70
– Night-parking warning panels, front
and rear
– Warning strips red/ white
– Plastic toolbox
– Maintenance support (optional)
– Roll-up tarpaulin, manual operation
– Cover net
– Podium with step
– Pivot tie-down rings (in pairs),
recessed into the cargo bed
– Drop side lifting spring for fold-down
operation (side drop sides)