Humbaur 10000 Series, Руководство по эксплуатации

Страница: 160 / 230

158 Inspection, care and maintenance
Safety inspections
7
Trailers must be inspected by a
competent / qualified specialist for their
condition for safe operation as and when
required, but at least once a year.
This also applies to all components
which are used for the load securing
according to VDI 2700 or / and EN
12642.
Instructions for maintenance
work on the following
assemblies can be found in the
operating and maintenance
instructions of the manufacturer:
– Support devices,
– Axles,
– Brake system.
All important mechanical components
must be inspected and maintained at
regular intervals for safety reasons.
These include:
– Axles,
– Brakes
– Bolts
– Pipe connections
– Attachments
– Telescopic cylinder,
– Switch-off and securing mechanisms
– Electrical systems.
These regular intervals are specified on
page
160 "Maintenance intervals".
– Comply with the accident prevention
regulations for all maintenance work.
– Comply with the environmental
protection guidelines.
– Switch off the engine prior to starting
maintenance work.
– Damaged tie-down towing rings may
never be repaired, but must be
exchanged for new parts.
– Damaged and non-functioning trailer
parts must be exchanged for original
spare parts made by Humbaur
GmbH.