Hughes HX100, Руководство по установке

Страница: 22 / 138

Chapter 1 • Introduction
4
1037106-0001 Revision B.03-Draft
HX100 overview
The HX100 remote terminal, shown in Figure 3, is a
rack-mounted very small aperture terminal (VSAT) that provides
satellite connectivity between a remote IP device such as a
computer, POS device, or small LAN, and the HX system
gateway (GTWY). The HX100 is suitable for both rack-mounted
or desktop use. As shown in Figure 4, the HX100 is equipped
with a serial port, two Ethernet ports, a telephone line port, and an
internal modem.
Main memory 64MB
Flash memory 16MB
Protocol Support TCP/IP protocol suite
Table 1: HX50 equipment specifications (Continued)
Product Element Specification
Figure 3: HX100 Remote terminal
Figure 4: HX100 rear panel
J5-SERIAL SYNC/ASYNC J3-LAN 1 J2-DEBUG J1-TEL J4-LAN 2
J6-SAT IN J7-SAT OUT
J8-POWER
SERIAL SYNC/ASYNC
To Serial device
DEBUG
LAN 1/LAN 2
To customer computer
or Ethernet device
TEL LINE
To phone
jack
SAT IN
Receive cable
from antenna
assembly
SAT OUT
Transmit cable
from antenna
assembly
POWER
to power supply
G-28579 C 05/31/06