Hughes HX100, Руководство по установке

Страница: 16 / 138

• About this document
xvi
1037106-0001 Revision B.03-Draft
Chapter 5 – Completing the Installation discusses those tasks that
must be completed after the remote terminal is installed and
commissioned to make it fully operational.
Chapter 6 – Troubleshooting describes procedures for correcting
problems encountered while installing or commissioning remote
terminals.
Chapter 7 – The System Control Center describes the System
Control Center, an embedded web application that provides
remote terminal status and configuration information to the user.
Appendix A – Configuring a Windows computer to support
DHCP explains how to configure a PC connected to the remote
terminal to use the Dynamic Host Control Protocol (DHCP),
which is used to manage the assignment of IP addresses to
devices on the remote LAN.
Appendix B – Updating the remote terminal software explains
how to use the Fallback Updater utility to update the
fallback.bin
file on an HX50/HX100 remote terminal.
Appendix C – Disabling a Web browser’s proxy connection
explains how to disable proxy server settings for Internet
Explorer and Netscape.
Appendix D – Conforming with standards and directives lists the
standards and directives that apply to HX50 and HX100
terminals.
This manual also contains a safety summary, a list of
abbreviations and acronyms, and an index.
Contact information for
product users For warranty or repair support, your contact information varies
depending on your location. If you need service, warranty or
repair support, please contact your customer service
representative in accordance with your service agreement.
%%BUSINESS GROUP REVIEWER: PLEASE VERIFY
THAT THIS IS THE CORRECT CONTACT
INFORMATION??%%