Hudson 63 1936, Руководство по механическим процедурам

Страница: 247 / 333

MECHANICAL PROCEDURE MANUAL
SECTION 20
Page 5
from the chalk mark until the wheel balances. When a third
weight is necessary it should remain directly on the chalk mark
and the two end weights only moved for balancing.
11. Remember, when the weights go up, move them closer
together; when they go down, move them farther apart.
12. When the PENDULUM pointer registers zero with the
wheel turned in any direction, the assembly is in balance. Force the lip of the weights between the tire and felloe band and
lock with the set screws. Be sure the weight fits snug on the
felloe before the set screw is tightened. If necessary bend the
lip.
13. Remove the wheel from the test stand and reinstall on
the car. Be sure the wheel bearings are properly lubricated,
correctly adjusted and the cotter key is secured in place.