Hubner AMP 41, Инструкция по эксплуатации и сборке

Страница: 15 / 106

Absolute Encoder AMP(H) 41
AMP(H)41_MANUAL-en_R11 - 2019-03-28 15
2.2 General risks when using the product
The product, hereinafter referred to as the measuring system, is manufactured according to
state-of-the-art technology and accepted safety rules. Nevertheless, non-intended use can
pose a danger to life and limb of the user or third parties, or lead to impairment of the
measuring system or other property!
Only use the measuring system in perfect technical condition, and only for its intended use,
paying attention to safety and dangers, and in compliance with the operating and assembly
instructions! Faults which could threaten safety should be eliminated without delay!
2.3 Intended use
The safety measuring system can be used for the detection of angular movement and
processing of measured data for a downstream safety host (F-Host) in systems in which the
goal of "Protection of travel" must be safely achieved. The complete processing chain of the
safety function must then satisfy the requirements of the applied safety standard.
The safety measuring system must only be used in safety applications in conjunction with a
control certified according to the applied safety standard.
The system manufacturer must check that the characteristics of the measuring system satisfy
his application-specific safety requirements. The responsibility or decision regarding the use of
the measuring system lies with the system manufacturer.
Intended use also includes:
●
observing all instructions in this operating and assembly instructions,
●
observing the nameplate and any prohibition or instruction symbols on the measuring
system,
●
observing the operating instructions from the machine/system manufacturer,
●
operating the measuring system within the limit values specified in the technical data,
●
ensuring that the fail-safe processing unit (F-Host) fulfils all required safety functions,
●
observing and using the checklist in the Appendix,
●
safe mounting (form-closed) of the measuring system to the driving axis.
2.4 Non-intended use
WARNING! NOTICE!
Danger of death, physical injury and damage to property in case of non-
intended use of the measuring system!
The following areas of use are especially forbidden:
–
in environments where there is an explosive atmosphere
–
for medical purposes
–
fastening transport or lifting tackle to the device,
for example a crane hook to lift a motor
–
fastening packaging components to the device,
for example ratchet straps, tarpaulins etc.
–
using the device as a step,
for example by people to climb onto a motor