9
Figure5- 4 Measuring Voltage (Lower Display)
Figure5- 5 Measuring Resistance
3.6 Measuring Frequency
The function of Measuring Frequency is only applicable to EDEKA TC-200 Multi-function
process calibrator. To measure the frequency, proceed as follows:
(1)
Press
until the lower display shows “MEASURE”.
(2)
Press
to select frequency until the display shows “Hz”.
(3)
Connect the test leads as shown in Figure5- 6.
You should see the measurement readings in the lower display.
3.7 Counting pulse
The function of counting pulse is only applicable to EDEKA TC-200 Multi-function process
calibrator. To use this function, proceed as follows:
(1)
Press
until the lower display shows “MEASURE”.
(2)
Press
to select counting pulse until the display shows “COUNT”.
(3)
Connect the test leads as shown in Figure5- 7.
(4)
Press
to start counting, and press
again to stop counting. Press
to
Содержание EDEKA TC-200
Страница 1: ...EDEKA TC 200 Temperature Calibrator Huazheng Electric Manufacturing Baoding Co Ltd...
Страница 2: ......
Страница 6: ......