6
temperature, and so on.
Cycles through:
Slow repeating 0%~100%~0% ramp;
Fast repeating 0%~100%~0% ramp;
Repeating 0%~25%~50%~75%~100%~0% step.
Increases the source value
,
least significant digit +1;
Decreases the source value
,
least significant digit -1.
Terminates a numeric entry, when setting a source value;
Begin/Stop counting pulse;
Confirm your choice in a list.
2.2.3 Display
Figure4- 3 shows the elements of a typical display.
Figure4- 3 Elements of a Typical Display
III.Using Measure Mode
3.1 Measuring Voltage (Upper Display)
To measure the voltage, proceed as follows.
(1)
Press
until the upper display shows “mV” or “V”.
(2)
Connect the test leads as shown in Figure5- 1.
You should see the measurement readings in the upper display.
3.2 Measuring Current (Upper Display)
To measure the current, proceed as follows:
(1)
Press
until the upper display shows “MEASURE”.
(2)
Connect the test leads as shown in Figure5- 2.
Содержание EDEKA TC-200
Страница 1: ...EDEKA TC 200 Temperature Calibrator Huazheng Electric Manufacturing Baoding Co Ltd...
Страница 2: ......
Страница 6: ......