9 Telnet and SSH
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
9-18
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
Data Preparation
To connect the STelnet client to the SSH2 server, you need the following data:
No.
Data
1
Name of the SSH server
2
Number of the port monitored by the SSH server
3
Preferred encrypted algorithm from the STelnet client to the SSH server
4
Preferred encrypted algorithm from the STelnet server to the SSH client
5
Preferred HMAC algorithm from the STelnet client to the SSH server
6
Preferred HMAC algorithm from the STelnet server to the SSH client
7
Preferred algorithm of key exchange
8
Name of the egress
9 Source
address
10
Name of the VPN instance
Configuration Procedures
No.
Procedure
1
Enabling the First-Time Authentication on the SSH Client
2
Configuring the SSH Client to Assign the RSA Public Key to the SSH Server
3
Enabling the STelnet Client
4
Checking the Configuration
9.5.2 Enabling the First-Time Authentication on the SSH Client
Do as follows on the login router:
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
ssh client first-time enable
The first-time authentication on the SSH client is enabled.
----End
