6 File System
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
6-10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 05 (2010-01-30)
Applicable Environment
The system provides prompts for some operations, such as the operation that may cause data
loss or damage.
Pre-configuration Tasks
Before configuring a file system, complete the following tasks:
z
Powering on the router
z
Logging in to the router by the client end
Data Preparation
To configure the prompt mode, you need the following data.
No.
Data
1
Name of the command
Configuration Procedure
Do as follows on the router:
Step 1
Enter the user view.
Step 2
Run:
system-view
The system view is displayed.
Step 3
Run:
file prompt
{
alert
|
quiet
}
The prompt mode of the file system is configured.
----End
6.7 Example for Configuring Directory Management
Networking Requirements
By configuring the file system of the router, the user can operate the router through the
console port and copy files to the specified directory.
Configuration Roadmap
The file path in the memory must be correct. If you do not specify the target file name, the
target file name is the source file name by default, that is, the target file name is the same as
the source file name.
