Huawei PDU8000 Series Скачать руководство пользователя страница 5

Страница: 5 / 157

PDU8000 Modular Precision PDC V2.0
User Manual

About This Document

Issue 03 (2018-01-25)

Huawei Proprietary and Confidential



Technical support engineers



System engineers



Commissioning engineers



Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to
personal injury.

Calls attention to important information, best practices
and tips.

NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.

Issue 03 (2018-01-25)

Added the 2500 mm high cabinet.

Added functional components for fire linkage.

Issue 02 (2017-06-28)

This issue is the first official release.

Содержание PDU8000 Series






























































































































































Результаты поиска

Содержание PDU8000 Series

Отзывы:

Похожие инструкции для PDU8000 Series

Бренды по названию

Популярные бренды

Huawei PDU8000 Series, Руководство пользователя

Результаты поиска

Содержание PDU8000 Series

Отзывы:

Похожие инструкции для PDU8000 Series

Бренды по названию

Популярные бренды