manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 285 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 285

NOTE

Send-time for a key-id is configured according to the timing mode defined for the keychain.
Only one send key-id in a keychain can be active at a time. The send-time of different key-ids
in a keychain must not overlap each other.

To re-configure send-time, we need to undo the send-time that is currently configured.

----End

13.3.9 Configuring receive-time of a key-id

Procedure

l

Absolute Timing Mode

1.

Run:

system-view

The system view is entered.

2.

Run:

keychain

 

keychain-name

 

mode

 

absolute

The keychain is created in absolute timing mode and keychain view is entered.

3.

Run:

key-id

 

key-id

The key-id is created and key-id view is entered.

4.

Run:

receive-time

 

utc

 

start-time start-date

 { 

duration

 { 

duration-value

 | 

infinite

 } | { 

to

 

end-time end-date

 }

The receive-time for the key-id is configured.

l

Daily Periodic Timing Mode

1.

Run:

system-view

The system view is entered.

2.

Run:

keychain

 

keychain-name

 

mode

 

periodic

 

daily

The keychain is created in daily periodic timing mode and keychain view is entered.

3.

Run:

key-id

 

key-id

The key-id is created and key-id view is entered.

4.

Run:

receive-time

 

daily

 

start-time

 

to

 

end-time

The receive-time for the key-id is configured.

l

Weekly Periodic Timing Mode

1.

Run:

system-view

The system view is entered.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

13 Keychain Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

271

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов