manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 117 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 117

whether to allow user access based on the authentication result from the authentication server
only.

CAUTION

If local authentication is used, EAP cannot be configured.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

dot1x authentication-method

 { 

chap

 | 

eap

 | 

pap

 }

The authentication mode is configured for 802.1x users.

By default, the AR1200-S uses CHAP to authenticate 802.1x users.

----End

5.3.6 (Optional) Setting the Access Method on an Interface

The AR1200-S provides interface-based access method and MAC address-based access method.

Context

MAC address-based access method: 802.1x users on an interface are authenticated
independently.

Interface-based access method: All the other users on an interface can use network resources
after the first user is authenticated. After the first user goes offline, other users cannot use network
resources.

The access method can be configured in the system view or interface view.

CAUTION

If there are online 802.1x users on an interface, you cannot change the access method of the
interface.

Procedure

l

Setting the access method on an interface in the system view
1.

Run:

system-view

The system view is displayed.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

5 NAC Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

103

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов