manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 125 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 125

3.

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

4.

Run:

dot1x restrict-vlan

 

vlan-id

A restrict VLAN is configured on the interface.

By default, no restrict VLAN is configured on an interface.

----End

5.3.15 (Optional) Enabling the Handshake Function

After the handshake function is enabled, the AR1200-S sends handshake packets periodically
to detect whether users are online.

Context

If a client does not support the handshake function, the AR1200-S will not receive handshake
response packets within the handshake interval and considers that the user is offline. Therefore,
if the client does not support the handshake function, disable the handshake function on the
AR1200-S.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

dot1x handshake

The AR1200-S is enabled to send handshake packets to online users.

By default, the AR1200-S sends handshake packets to online users.

Step 3

(Optional) Run:

dot1x timer

 

handshake-period

 

handshake-period-value

The handshake interval between the AR1200-S and the 802.1x client is set.

By default, the handshake interval between the AR1200-S and the 802.1x client is 60s.

----End

5.3.16 (Optional) Setting the Maximum Number of Times the
AR1200-S Sends Authentication Requests

Users may not respond to authentication requests if packets are discarded because of an unstable
network. To solve the problem, set the maximum number of times authentication requests are
sent.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

5 NAC Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

111

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов