Huawei AR1200-S Series Скачать руководство пользователя страница 166

Страница: 166 / 308

reduce the burden of the CPU, ensuring nonstop service transmission. After this function is
configured, the AR1200-S discards excess packets.

NOTE

After rate limiting of ICMP packets is configured, the AR1200-S may fail to respond to ping packets.

Procedure

Configuring the global rate limit for ICMP packets
1.

Run:

system-view

The system view is displayed.

Run:

icmp rate-limit enable

The global ICMP packet rate limiting function is enabled.

By default, the global ICMP packet rate limiting function is disabled on an AR1200-
S.

(Optional) Run:

icmp rate-limit

threshold

threshold-value

The global rate limit for ICMP packets is set.

By default, the global rate limit for ICMP packets is 100 pps.

Configuring the rate limit for ICMP packets on a specified interface
1.

Run:

system-view

The system view is displayed.

Run:

interface

interface-type

interface-number

The interface view is displayed.

The AR1200-S can limit the rate at which ICMP packets are received on GE
interfaces,Ethernet interfaces and Eth-Trunk interfaces.

Run:

icmp rate-limit enable

The ICMP packet rate limiting function is enabled on the interface.

By default, the ICMP packet rate limiting function is disabled on an AR1200-S.

(Optional) Run:

icmp rate-limit

threshold

threshold-value

The highest rate at which ICMP packets are received on the interface is set.

By default, the rate limit for ICMP packets on an interface is 100 pps

To configure rate limits for ICMP packets on multiple interfaces, repeat this step.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

7 ICMP Security Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

152

Содержание AR1200-S Series





















































































































































































































































































































Результаты поиска

Содержание AR1200-S Series

Отзывы:

Huawei AR1200-S Series, Руководство по настройке, Страница: 166 / 308

Результаты поиска

Содержание AR1200-S Series

Отзывы: