manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 27 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 27

By default, the default authentication scheme is used. The default authentication
scheme can be modified, but it cannot be deleted.

4.

Run:

authentication-mode

 

radius

 [ 

none

 ]

RADIUS authentication is configured.

By default, local authentication is used.

To use local authentication as the backup authentication method, run the

authentication-mode

 

radius

 

local

 command to configured local authentication.

NOTE

If multiple authentication modes are configured in an authentication scheme, authentication
modes are used according to the sequence in which they were configured. The AR1200-S uses
the authentication mode that was configured later only after the current authentication mode
fails. The AR1200-S stops the authentication if the user fails to pass the authentication.

5.

(Optional) Run:

authentication-super

 { 

hwtacacs

 | 

super

 } 

*

 [ 

none

 ]

The authentication mode used to upgrade user levels is configured.

6.

(Optional) Run:

quit

Return to the AAA view.

7.

(Optional) Run:

domainname-parse-direction

 { 

left-to-right

 | 

right-to-left

 }

The direction in which the user name and domain name are parsed is configured.

l

Configuring an accounting scheme

1.

Run:

system-view

The system view is displayed.

2.

Run:

aaa

The AAA view is displayed.

3.

Run:

accounting-scheme

 

accounting-scheme-name

An accounting scheme is created and the accounting scheme view is displayed.

By default, the 

default

 accounting scheme is used. The default accounting scheme

can be modified, but it cannot be deleted.

4.

Run:

accounting-mode

 

radius

 

The accounting mode is set.

By default, non-accounting is used.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

1 AAA Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

13

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов