Huawei AR1200-S Series Скачать руководство пользователя страница 185

Страница: 185 / 308

Step 2

Run:

cpu-defend policy

policy-name

An attack defense policy is created and the attack defense policy view is displayed.

The AR1200-S supports a maximum of 19 attack defense policies, including the

default

attack

defense policy. The

default

attack defense policy is automatically generated in the system by

default and is applied to all boards. The

default

attack defense policy cannot be deleted or

modified. The other 18 policies can be created and deleted.

Step 3

(Optional) Run:

description

text

The description of the attack defense policy is configured.

Step 4

Run:

auto-defend enable

Automatic attack source tracing is enabled.

By default, attack source tracing is disabled.

Step 5

(Optional) Run:

auto-defend protocol

{

all

| {

arp

dhcp

icmp

igmp

tcp

telnet

ttl-

expired

}

The types of traced packets are specified.

By default, the AR1200-S traces sources of ARP, DHCP, ICMP, IGMP, TCP, Telnet, and TTL-
expired packets after attack source tracing is enabled.

Step 6

(Optional) Run:

auto-defend trace-type

{

source-ip

source-mac

source-portvlan

}

The attack source tracing modes are specified.

By default, the AR1200-S traces attack sources based on the source IP address, source MAC
address, and source interface plus VLAN.

Step 7

(Optional) Run:

auto-defend threshold

threshold

The threshold for attack source tracing is set.

By default, the threshold for attack source tracing is 128 pps.

Step 8

(Optional) Run:

auto-defend action

deny

[

timer

time-length

]

The AR1200-S is configured to drop packets sent from attack sources.

By default, the AR1200-S does not drop packets sent from attack sources.

Step 9

(Optional) Configure the alarm function for attack source tracing.
1.

Run:

auto-defend alarm enable

The alarm function for attack source tracing is enabled.

By default, the alarm function for attack source tracing is disabled.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

9 Local Attack Defense Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

171

Содержание AR1200-S Series





















































































































































































































































































































Результаты поиска

Содержание AR1200-S Series

Отзывы:

Huawei AR1200-S Series, Руководство по настройке, Страница: 185 / 308

Результаты поиска

Содержание AR1200-S Series

Отзывы: