manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 190 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 190

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

cpu-defend policy

 

policy-name

The attack defense policy view is displayed.

Step 3

Run:

rate-limit all-packets

 

pps

 

pps-value

The rate limit for all packets sent to the CPU is set.

The AR1200-S then randomly discards the packets that exceed the rate limit to protect the CPU.

----End

9.4.7 (Optional) Configuring the Rate Limit for Packets After ALP
Is Enabled

You can set the rate limit for packets in the attack defense policy after ALP is enabled.

Context

Active link protection (ALP) protects session-based application layer data, including data of
HTTP Sessions, FTP sessions. It ensures non-stop transmission of these services when attacks
occur.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

cpu-defend policy

 

policy-name

The attack defense policy view is displayed.

Step 3

Run:

application-apperceive

 

packet-type

 { 

  | 

ftp

 | 

http

 } 

rate-limit

 

rate-value

The rate limit for  HTTP, FTP packets is set.

NOTE

During setup of an HTTP connection,an FTP connection , if the 

application-apperceive

 command is not

used to specify a rate, the default rate limit specified by 

application-apperceive

 is applied to HTTP,FTP.

By default, the rate limit for FTP packets is 1024 pps and the rate limit for and HTTP packets is 512 pps
when the session is enabled with ALP

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

9 Local Attack Defense Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

176

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов