manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 23 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 23

6.

(Optional) Run:

quit

Return to the AAA view.

7.

(Optional) Run:

domainname-parse-direction

 { 

left-to-right

 | 

right-to-left

 }

The direction in which the user name and domain name are parsed is configured.

l

Configuring an authorization scheme
1.

Run:

system-view

The system view is displayed.

2.

Run:

aaa

The AAA view is displayed.

3.

Run:

authorization-scheme

 

authorization-scheme-name

An authorization scheme is created and the authorization scheme view is displayed.

By default, the default authorization scheme is used. The default authorization scheme
can be modified, but it cannot be deleted.

4.

Run:

authorization-mode

 

local

 [ 

none

 ]

The authorization mode is configured.

----End

1.3.4 Configuring a Domain

The created authentication and authorization schemes take effect only after being applied to a
domain.

Context

Before configuring a domain, ensure that the authentication and authorization schemes have
been created.

When local authentication and authorization are used, non-accounting is used by default.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

aaa

The AAA view is displayed.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

1 AAA Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

9

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов