manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 120 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 120

The system view is displayed.

2.

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

3.

Run:

dot1x max-user

 

user-number

The maximum number of concurrent access users is set on the interface.

By default, each interface allows a maximum number of 128 concurrent access users.

----End

5.3.9 (Optional) Enabling 802.1x Authentication Triggered by
DHCP Messages

After 802.1x authentication triggered by DHCP messages is enabled, the AR1200-S
authenticates users when they send DHCP messages to apply for IP addresses.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

dot1x dhcp-trigger

802.1x authentication triggered by DHCP messages is enabled.

By default, 802.1x authentication triggered by DHCP messages is disabled.

----End

5.3.10 (Optional) Setting Values of Timers Used in 802.1x
Authentication

On the AR1200-S, you can set the client authentication timeout timers, handshake interval
between the AR1200-S and the 802.1x client, quiet timer value, re-authentication interval, and
interval for sending authentication requests.

Context

Before setting the value of a timer used in 802.1x authentication, ensure that the timer function
is enabled.

It is recommended that you retain default settings of the timers.

Procedure

Step 1

Run:

system-view

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

5 NAC Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

106

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов