manualshive.com logo in svg

Huawei AR1200-S Series, Руководство по настройке, Страница: 143 / 308

Поделиться
Скачать
Huawei AR1200-S Series Скачать руководство пользователя страница 143

6.3.2 Enabling Strict ARP Learning

Strict ARP learning prevents attackers from sending packets with the bogus gateway address to
attack the AR1200-S.

Procedure

l

Configuring strict ARP learning globally

1.

Run:

system-view

The system view is displayed.

2.

Run:

arp learning strict

Strict ARP learning is enabled.

By default, strict ARP learning is disabled on the AR1200-S.

l

Configuring strict ARP learning on an interface

1.

Run:

system-view

The system view is displayed.

2.

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

On the AR1200-S, strict ARP learning can be enabled on Layer 3 Ethernet interfaces
and its sub-interfaces, Layer 3 GE interfacesand its sub-interfaces, Layer 3 Eth-Trunk
interfaces and its sub-interfaces, and VLANIF interfaces.

3.

Run:

arp learning strict

 { 

force-enable

 | 

force-disable

 | 

trust

 }

The strict ARP entry learning function is enabled on the interface.

–

force-enable

: enables strict ARP entry learning on an interface.

–

force-disable

: disables strict ARP entry learning on an interface.

–

trust

: indicates that the configuration of strict ARP entry learning on an interface

is the same as that configured globally.

By default, the configuration of strict ARP entry learning on an interface is the same
as that configured globally.

----End

6.3.3 Configuring Interface-based ARP Entry Limiting

If attackers occupy a large number of ARP entries, the AR1200-S cannot learn ARP entries of
authorized users. To prevent such attacks, set the maximum number of ARP entries that can be
dynamically learned by an interface.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

6 ARP Security Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

129

Содержание AR1200-S Series





















































































































































































































































































































Отзывы:

Нет отзывов