manualshive.com logo in svg

HSM SP 5088, Руководство по эксплуатации, Страница: 28 / 60

Поделиться
Скачать
HSM SP 5088 Скачать руководство пользователя страница 28

28  

 

2.991.999.120_en

 07/2013

SP 5088

Main switch (1)

The main switch is on when it is turned 90° to the right.
In the “Off” position, the main switch can be secured with a padlock.

Emergency stop (2) 

Turn the “Emergency stop” button to the left unlock it.
If you press the “Emergency stop” button the power circuit is broken. This switches
off the baling press and the shredder.

“Automatic mode” key (3)

This key switches the baling press into automatic mode. Deselect the automatic mode by
pressing the key again. 

 

“Automatic mode” LED (4)

This symbol lights up yellow as soon as the automatic mode is switched on.

“Standby” LED (5)

This symbol lights up green as soon as the main switch is switched on and the machine 
receives power.
This symbol fl ashes in the set-up mode or with the “Bale ready” message

“Press ram forward” key (6)

(arrow in direction of pressing)
This key starts the press cycle. The press ram moves forward and presses the material.
After the compression time has expired, the press ram automatically moves to the rear
limit position. The motor switches off.

“Stop press ram” key (7)

This key is used to stop the press ram in any position.

“Press ram backward” key (8)

(arrow opposite direction of pressing)
This key moves the press ram back to the rear limit position. 

0

I

0

Содержание SP 5088





























































Отзывы:

Нет отзывов