HSD
5801H0056
________________________________________________________________
8/181
1.6 SPECIFIC RISKS DURING ELECTROSPINDLE MAINTENANCE
To safely operate an HSD product fitted on the machine, refer to the manual of the
machine itself.
•
Disconnect the product from the main power supply before carrying out any maintenance
operations!
•
Even when the product is disconnected from the power supply, the rotating parts (and moving
parts in general) can nevertheless move, due to their inertia; before carrying out maintenance
operations therefore, check that the moving parts of the product are at a standstill.
1.7 RESIDUAL RISKS
The product has been analysed on the basis of Directives 2006/95/EC and 2006/42/EC in order to
identify possible sources of risk. The risks that still remain (residual risks) and the respective
countermeasures are described in the relevant sections of this manual.
1.8 PURPOSE OF THE PRODUCT
The product cannot work independently: it is a part of a machine, and is designed to be assembled
with other machine parts, or to be incorporated in a machine, so as to form a machine in
accordance with Directive 2006/42/EC.
It is forbidden to set the product into operation before the machine into which it is to be
incorporated complies with the provisions of Directive 2006/42/EC and subsequent
amendments.
1.9 RANGE OF APPLICATIONS
The product has been designed to carry out milling and boring operations in the field of wood and
its derivatives, plastic, fibre, aluminium, and light machining operations on other metals.
The quick replacement of the shaft unit complete with bearings is possible on some models, using
the “shaft kit”. For further information see section 11 List of spare parts
All the electrospindles have a mechanical reaction system that neutralises the axial force of the
piston on the shaft during the tool changing phase, guaranteeing the integrity of the precision
bearings.
1.10 IDENTIFICATION OF THE PRODUCT AND THE MANUFACTURER
The EC marking plate and the serial number represent the only elements to identify the product
acknowledged by HSD S.p.A. The user of the product is obliged to maintain the integrity of these
signs.
In section 2 you can see the position of the EC mark and the serial number of the product.
