HSD
5801H0056
_______________________________________________________________
65/181
3
TRANSPORT, PACKAGING, UNPACKING, STORAGE
3.1 WARNINGS
•
The lifting and handling of the product may create hazardous situations for the persons involved;
we therefore recommend that the instructions given by HSD S.p.A. are observed and that only
suitable tools are used.
•
The installation and assembly operations must always be carried out by specialised technicians
only.
•
We recommend that all lifting and handling operations of the product or its parts be carried out
with great care, avoiding collisions that could compromise the proper functioning, or damage
coated parts.
The user is responsible for selecting the lifting equipment (ropes, straps or chains, etc.)
considered most suitable in terms of both functionality and lifting capacity, with regard to
the weight indicated on the packaging and on the product label.
3.2 DIMENSIONS AND WEIGHTS
•
Weight of the packed product: indicated on the packing.
•
Linear dimensions of the packaging: shown in the accompanying documents.
3.3 TRANSPORT AND PACKAGING CONDITIONS
The product is shipped protected by a covering of VCI plastic
and expanded foam, packed in a wooden crate or case of
special cardboard.
The figure shows a few methods of lifting the packed product
(using ropes and a fork-lift truck; in the latter case, ensure that
during lifting the centre of gravity of the crate is always between
the two forks).
The examples shown are only indications, as it is not possible
to determine in advance all the possible configurations for lifting
a product manufactured by HSD S.p.A.
3.4 UNPACKING PROCEDURE
Check the integrity of the seals on the packaging
before opening it.
If the product is packed in a wooden crate, insert a
screwdriver under the locking hook. Lever it open, paying
attention not to damage the packaging and its contents.
If the product is packed in a cardboard case, remove the
strip of adhesive tape, paying attention not to damage the
packaging and its contents.
Do not lift the product by pulling on the part of the electric fan, in order not to damage the
guard.
i
The expanded foam and plastic cover can be disposed of as plastic material.
