HSD
5801H0056
_______________________________________________________________
10/181
1.12 GUARANTEE CONDITIONS
HSD S.p.A. guarantees that the electrospindle has been inspected at its plant with a positive result.
Works under warranty shall be performed free at the HSD S.p.A. facilities, transport at the
customer's expense; HSD S.p.A. shall not be liable for termination of production during the
warranty period.
The warranty does not cover faults due to normal wear of those parts which, by their nature, are
subject to rapid and continuous wear (e.g. gaskets, belts, bearings, etc.). In particular, HSD S.p.A.
gives no guarantee as to the working life of the bearings, as this depends on various factors
including: the degree of balancing of the tools, the types of machining operation, collisions and/or
mechanical stresses beyond the values indicated by the manufacturer.
HSD S.p.A. accepts no liability for faults in the conformity of the electrospindle caused by a failure
to observe the standards of the instruction manual or the incorrect operation or handling of the
electrospindle.
The buyer shall therefore have a right to replacement of parts found to be defective
only if the faults have not been caused by tampering, namely by installing non-original HSD spare
parts and/or replacing components not provided for and not authorised in this manual and, in any
case, without the prior written approval of HSD S.p.A.
On no account shall HSD S.p.A. or its suppliers be responsible for damage (including but not limited
to damage to the physical integrity of the product or damages due to loss or reduced earnings,
stoppages in production, loss of information or other economic losses) resulting from the use of
HSD products, even in cases where HSD S.p.A. has been warned of the possibility of such damage.
The buyer's warranty shall be voided if HSD S.p.A. is not notified in detail, in writing, of the nature
of any faults discovered in the electrospindle within 15 days of the fault being discovered. The
buyer's warranty shall also be voided in the event that he does not allow the seller to carry out any
requested inspections, or if the seller requests the return of the defective parts and the buyer fails
to return them within two weeks of the request.
Measured drawings and photographs are provided purely as reference examples for a simpler
understanding of the text.
In line with its policy of continuous development and advancement of the product, the company
reserves the right to modify both its functional and aesthetic characteristics, to vary the design of
any functional element or accessory, or to suspend production and delivery; this without
undertaking to give notice to anyone and without incurring any other obligation. Furthermore, HSD
S.p.A. reserves the right to make any structural or functional modifications, as well as the
modification of the supplied spare parts and accessories, without the obligation of communicating
these changes to anyone or assuming any other obligation.
