6.
Create volumes and expand the file system.
a.
Go to
Storage
and select the
Storage Configuration
tab. You are prompted to rescan for storage.
b.
Click
OK
and click
Scan for Storage
. You will see a storage scan in progress message. The scan
can take up to 5 minutes.
NOTE:
If you receive a
Warning
dialog box saying that no additional storage devices were found, check cables and the power state
of attached devices and try the scan again.
The Capacity now shows all storage as licensed. Look in the
Unconfigured storage
section to
view the newly added capacity Upgrade kit(s). The
Status
should display as
Green tick / OK –
Blank
.
c.
Click the
Create Volumes
button at the top of the page. A dialog box will appear that states,
Please Wait — Volume Creation in progress
.
Applying the License and Completing the RAID Expansion
45
