manualshive.com logo in svg

HPE ProLiant DX170r Gen10, Руководство пользователя

Поделиться
Скачать
HPE ProLiant DX170r Gen10 Скачать руководство пользователя страница 87

• Critical boot drivers

• Active Health System (AHS)

• Erase Utility

• Deployment Settings

IMPORTANT:

• Although your server is preloaded with firmware and drivers, Hewlett Packard Enterprise

recommends updating the firmware upon initial setup. Also, downloading and updating the latest
version of Intelligent Provisioning ensures the latest supported features are available.

• For ProLiant servers, firmware is updated using the Intelligent Provisioning Firmware Update

utility.

• Do not update firmware if the version you are currently running is required for compatibility.

NOTE: 

Intelligent Provisioning does not function within multihomed configurations. A multihomed host is

one that is connected to two or more networks or has two or more IP addresses.

Intelligent Provisioning provides installation help for the following operating systems:

• Microsoft Windows Server

• Red Hat Enterprise Linux

• SUSE Linux Enterprise Server

• VMware ESXi/vSphere Custom Image

• ClearOS

Not all versions of an OS are supported. For information about specific versions of a supported operating
system, see the OS Support Matrix on the Hewlett Packard Enterprise website (

http://www.hpe.com/

info/ossupport

).

Management Security

HPE ProLiant Gen10 servers are built with some of the industry's most advanced security capabilities, out
of the box, with a foundation of secure embedded management applications and firmware. The
management security provided by HPE embedded management products enables secure support of
modern workloads, protecting your components from unauthorized access and unapproved use. The
range of embedded management and optional software and firmware available with the iLO Advanced
license provides security features that help ensure protection, detection, and recovery from advanced
cyber-attacks. For more information, see the 

HPE Gen10 Server Security Reference Guide

 on the

Hewlett Packard Enterprise Information Library at 

http://www.hpe.com/support/gen10-security-ref-en

.

Scripting Toolkit for Windows and Linux

The STK for Windows and Linux is a server deployment product that delivers an unattended automated
installation for high-volume server deployments. The STK is designed to support ProLiant servers. The
toolkit includes a modular set of utilities and important documentation that describes how to apply these
tools to build an automated server deployment process.

The STK provides a flexible way to create standard server configuration scripts. These scripts are used to
automate many of the manual steps in the server configuration process. This automated server

Software and configuration utilities

87

Содержание ProLiant DX170r Gen10





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды