Installing an M.2 SSD
Prerequisites
Before installing this option, make sure that you have the following tools available:
• Phillips No. 1 screwdriver
• T-15 Torx screwdriver
Procedure
1.
on page 19.
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis
on page 19.
4.
on page 21.
5.
Remove the DIMM guard:
a.
Remove the DIMM guard screw.
b.
Carefully disengage the latch from the DIMM guard post.
c.
Remove the DIMM guard.
Retain the component for future use.
6.
Install the SSD:
a.
Insert the SSD into the M.2 slot at a 45° angle.
b.
Carefully press the SSD down to the horizontal position.
c.
Install the SSD mounting screw.
62
Hardware options installation
