HPE ProLiant DX170r Gen10, Руководство пользователя

Страница: 68 / 132

19. Connect all peripheral cables to the server.
20. Power up the server on page 19.
The installation is complete.
Installing the Media Module adapter
CAUTION: The maximum inlet ambient temperature for most components installed in the system is
35°C (95°F). Some components, however, are subject to thermal limitations depending on the
chassis model and the fan configuration. There are some hardware configurations where it is
necessary to limit the number of drives installed in the chassis. For more information, see
Temperature requirements .
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1. Power down the server on page 19.
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis on page 19.
4. Remove the air baffle on page 21.
5. If a secondary riser option is installed, remove the bayonet board .
6. Do one of the following:
• Remove the secondary riser blank on page 24.
• Remove the secondary riser cage on page 27.
7. Do one of the following:
• Remove the primary riser blank on page 30.
• Remove the primary riser cage on page 29.
8. Remove the Media Module blank.
68 Hardware options installation