VLAN
Lists the
vid
of each VLAN configured on the switch to support PIM-DM.
IP Address
Lists the IP addresses of the PIM interfaces (VLANs.)
Mode
Shows
dense
or
sparse
, depending on which PIM protocol is configured on the router.
Two configured PIM interfaces
switch(config)# show ip pim interface
PIM Interfaces
VLAN IP Address Mode
---- --------------- ------------
1 10.1.10.1 sparse
2 10.2.10.1 sparse
Displaying IP PIM VLAN configurations
Syntax:
show ip pim interface [
vid
]
Displays the current configuration for the specified VLAN (PIM interface.)
Table 9: PIM interface configuration settings
Field
Default
Control command
VLAN
N/A
vlan
vid
ip pim
IP
N/A
vlan
vid
ip pim all | ip-addr
Mode
dense
n/a; PIM Dense only
Hello interval (sec)
300
ip pim hello interval 5 - 30
Hello delay
5
The router includes this value in the
"Hello" packets that it sends to
neighbor routers. Neighbor routers
use this value to determine how
long to wait for another Hello packet
from the router. See
interval for PIM-SM neighbor
notification
on page 90.
override interval (msec)
2500
vlan
vid
ip pim override-interval 500
- 6000
Propagation delay (msec)
500
vlan
vid
ip pim propagation-delay
250-2000
Table Continued
108
Aruba 3810 / 5400R Multicast and Routing Guide for ArubaOS-
Switch 16.08