IP Address Area ID Status Type Type Cost Pri
--------------- --------------- -------- ----- ------ ----- ---
10.3.2.35 backbone enabled BCAST none 1 1
10.3.3.35 backbone enabled BCAST none 1 1
10.3.16.35 10.3.16.0 enabled BCAST none 1 1
10.3.32.35 10.3.32.0 enabled BCAST none 1 1
OSPF configured interface timers:
Transit Retransmit Hello Dead
IP Address Delay Interval Interval Interval
-------------- ------- ---------- --------- ----------
10.3.2.35 1 5 10 40
10.3.3.35 1 5 10 40
10.3.16.35 1 5 10 40
10.3.32.35 1 5 10 40
OSPF configured virtual interfaces:
Authen Xmit Rxmt Hello Dead
Area ID Router ID Type Delay Intvl Intvl Interval
--------------- --------------- ------ ------ ------ ------ ----------
10.3.16.0 10.0.8.33 none 1 5 10 40
10.3.16.0 10.0.8.36 none 1 5 10 40
Table 29: CLI display of OSPF route and status information
Field
Description
OSPF protocol
enabled
or
disabled
— indicates if OSPF is currently enabled.
Router ID
The router ID that this routing switch is currently using to identify itself.
Currently defined areas:
Area ID
The identifier for this area.
Type
The type of OSPF area (normal or stub.)
Stub Default Cost
The metric for any default route we injected into a stub area if the routing
switch is an ABR for the area. This value applies only to stub areas.
Stub Summary LSA
send
or
don't send
— indicates the state of the
no-summary
option for the stub area. The value indicates if the area is "totally stubby"
(no summaries sent from other areas) or just "stub" (summaries sent.)
Applies only to stub areas and takes effect only if the routing switch is the
ABR for the area.
Table Continued
Chapter 11 Open Shortest Path First Protocol (OSPF)
245
