Field
Description
Stub Metric Type
This value is always
ospf metric
.
Currently defined address ranges:
Area ID
The area where the address range is configured.
LSA Type
This value is always
Summary
.
IP Network
The address part of the address range specification.
Network Mask
The mask part of the address range specification.
Advertise
Whether advertising (
yes
) or suppressing (
no
) this address range.
Cost
The cost of the interface connection between one switch and another,
which is determined by the bandwidth in mega bits per second. The
OSPF protocol determines the interface connection cost of each neighbor
and uses these costs to determine the best path to reach a destination.
The cost can range from a minimum of 1 to a maximum of 10. The faster
the connection, the lower the cost. For example, a fast Ethernet interface
cost is 1 and a Ethernet interface cost is 10.
NOTE:
The remaining interface and virtual link information is the same as for the previously
described OSPF
show
commands.
Viewing OSPF traps enabled
In the default configuration, OSPF traps are disabled. Use this command to view which OSPF traps have been
enabled.
Syntax:
show ip ospf traps
Lists the OSPF traps currently enabled on the routing switch.
For more information, see
Changing OSPF trap generation choices
on page 210.
Debugging OSFP routing messages
Syntax:
debug ip ospf
Turns on the tracing of OSPF packets and displays OSPF routing messages.
Enabling load sharing among next-hop routes
For more information, see
OSPF equal-cost multipath (ECMP) for different subnets available through the
Syntax:
[no] ip load-sharing 2-4
246
Aruba 3810 / 5400R Multicast and Routing Guide for ArubaOS-
Switch 16.08