RIP interface information for 100.2.0.1
IP Address : 100.2.0.1
Status : enabled
Send Mode : V2-only
Recv mode : V2-only
Metric : 1
Auth : none
Bad packets received : 0
Bad routes received : 0
Sent updates : 0
Viewing RIP peer information
To display RIP peer information, enter the
show ip rip peer
command at any context level.
The resulting display will appear similar to the following:
Example of show IP rip peer output
switch# show ip rip peer
RIP peer information
IP Address Bad routes Last update timeticks
--------------- ----------- ---------------------
100.1.0.100 0 1
100.2.0.100 0 0
100.3.0.100 0 2
100.10.0.100 0 1
This display lists all neighboring routers from which the routing switch has received RIP updates. The following
fields are displayed:
IP address
IP address of the RIP peer neighbor.
Bad routes
The number of route entries that were not processed for any reason.
Last update timeticks
How many seconds have passed since the routing switch received an update from this peer neighbor.
To show the RIP peer information for a specific peer with IP address 100.1.0.100, enter
show ip rip peer
100.1.0.100
.
Example of show IP rip peer ip-addr output
switch# show ip rip peer 100.0.1.100
RIP peer information for 100.0.1.100
IP Address : 100.1.0.100
Bad routes : 0
Last update timeticks : 2
This display lists information in the fields described above (IP address, Bad routes, Last update timeticks.)
Viewing RIP redistribution information
To display RIP redistribution information, enter the
show ip rip redistribute
command at any context
level:
Chapter 8 Routing Information Protocol (RIP)
177
