HPC MOBILAIR M27 PE, Руководство по эксплуатации

Страница: 89 / 312

Result The plastic sheeting and adhesive tape is removed from the interior of the machine.
Cleaning the electrical components
In the event of heavy contamination of the generator control box (option), a gentle degreasing
cleaning agent may be used. The cleaning agent must not alter the surfaces of the objects being
cleaned.
1. Clean all plug sockets manually using a cleaning cloth.
2. Clean the generator control box manually using a cleaning cloth.
Cleaning indicating instruments:
➤ Clean sensitive display instruments manually using a cleaning cloth.
8.4.2 Cleaning the interior of the machine
Overview:
■ Cover the intake openings on both air filters
■ Adjust the high-pressure washer
■ Clean the interior of the machine
■ Remove all covers
■ Seal the floor pan (option)
Covering the intake openings on both air filters:
1. Cover the intake opening on the engine air filter.
2. Cover the intake opening on the compressor air filter.
Setting the high-pressure washer:
➤ For setting the high-pressure washer, see chapter 73.
High-pressure washer Value
Interior diameter of the jet nozzle [mm] 6.3
Flow rate [l/min] 12.5
Tab. 73 High-pressure washer setting
Cleaning the interior of the machine:
Precondition Set the high-pressure washer as per the values given in Table 73.
1.
NOTICE!
Jet water can damage the machine!
Jet water can damage or destroy electrical components and sensitive display instruments.
➤ Do not direct jet water at electrical components.
2. Do not direct jet water at the starter, control box or sensitive display instruments.
3. Do not direct jet water at solenoid valves or electrical plug-in connections.
4. Do not direct jet water at the starter battery.
8 Operation
8.4 Cleaning the machine after operation
No.: 9_9548 22 HCE
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
77