manualshive.com logo in svg

HPC MOBILAIR M27 PE, Руководство по эксплуатации, Страница: 61 / 312

Поделиться
Скачать
HPC MOBILAIR M27 PE Скачать руководство пользователя страница 61

Option / option designation Function
Defroster / bc

Moisten components of the control and regulating system with anti‐

freeze.

Tab. 65 Low temperature equipment options

4.6.4.1 Option bb

Pre-heat the drive engine coolant

The drive engine coolant can be pre-heated in order to attain an improved cold-start behaviour. An

electric pre-heating device has been installed for this purpose. The heating element of the pre-

heating device protrudes directly into the drive engine coolant.
The thermal output from the heating element into the coolant results in a slower circulation of the

coolant. Resulting from the circulation the supplied heat is evenly distributed. The coolant of the

drive engine and its direct surrounding significantly warm up above the local ambient temperature.

A melting protection protects against overheating.
The ideal pre-heating time depends on the outside temperature. Approx. 3 hours of pre-heating

time result in thermal balance. This means that subsequently supplied heat only serves to maintain

the already existing temperature. The rest of the subsequently supplied heat is emitted to the sur‐

roundings.

Damages to the drive engine and electrical pre-heating device are precluded with pre-heating

times lasting longer than 3 hours. However, the unnecessary energy consumption should be

prevented by shutting down the pre-heating device on time!

A flexible power cable has been included with the machine. To commission the pre-heating device

you only need to connect the power cable to the machine’s connection and the user's power sock‐

et.

Further information See Fig. 10 for the position of the device connection.

4.6.4.2 Option bb

Device connection of coolant pre-heating on the machine

Fig. 10 Device connection on the machine

1

Machine

2

Device connection

3

Drive engine

4

Heating element

5

Pre-heating device

4

Design and Function

4.6

Options

No.: 9_9548 22 HCE

Operating Manual    Portable Rotary Screw Compressor  
MOBILAIR M27 PE  

49

Option bb

Содержание MOBILAIR M27 PE

























































































































































































































































































































Отзывы:

Нет отзывов