HPC MOBILAIR M27 PE, Руководство по эксплуатации

Страница: 29 / 312

Compared to the previously approved corrosion inhibitors/antifreeze, they feature the following ad‐
vantages:
■ Fewer deposits in the engine cooling system
■ Improved heat flow
■ Higher environmental sustainability
The coolant (cooling fluid) is treated by adding anti-freeze with corrosion protection additives on the
basis of ethylene glycol to the water.
Coolant must meet the operating instructions of the engine manufacturer KUBOTA.
➤ Do not use a corrosion inhibitor/antifreeze that has not been approved by the engine manufac‐
turer.
➤ Do not use any impermissible mixing ratios of corrosion inhibitor/antifreeze and water.
Further information See chapter 10.3.1.3 for information on preparing/mixing the coolant to be used.
Initial filling of corrosion inhibitor/antifreeze:
For the initial filling, the coolant cooler is filled with a mixture of the following liquid components:
Components Description Percentages [% vol.]
Corrosion inhibitor/antifreeze
Glysantin ® G40 ®
50
Water 50
Tab. 39 Initial filling of coolant cooler
Miscibility with other corrosion inhibitors/antifreeze agents:
We do not recommend mixing with different corrosion inhibitors/antifreeze agents even if from the
same manufacturer. This can result in significantly reduced corrosion protection/antifreeze and
may damage the engine cooling system and consequently the engine. Mixtures of different corro‐
sion inhibitors/antifreeze agents generally provide a lower performance than the specially balanced
active components of one coolant type.
Therefore, the use of different corrosion inhibitors/antifreeze agent is only allowed after con‐
sulting with and approval from the engine manufacturer!
2.7.6 Fluid volumes
Description Fluid volume [litre]
Engine oil 4.0
Fuel 40.0
Coolant 5.0
Tab. 40 Fluid volumes
2.7.7 Batteries
Feature Value
Voltage [V] 12
Capacity [Ah] 62
2 Technical Specifications
2.7 Engine
No.: 9_9548 22 HCE
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
17