HPC MOBILAIR M27 PE, Руководство по эксплуатации, Страница: 149 / 312

10.5 Cooler maintenance
The respective engine and compressor coolers are arranged together in a radiator block.
Heavy contamination of both coolers will result in cooler overheating, and therefore overheating of
the machine. The frequency of cleaning is mainly dependent on local operating conditions.
Check both coolers regularly for clogging. Severe contamination should be cleaned by
KAESER SERVICE.
Material Compressed air
Breathing mask (if necessary)
Water or steam jet blaster
Object as support
Screwdriver
Precondition The machine is switched off.
The machine has been set down in cleaning area with oil separator,
The machine has been set down on level ground,
the machine has cooled down.
Air consumers are disconnected,
the outlet valves are open,
the machine is fully vented, the pressure gauge reads 0 bar.
Enclosure is open,
negative cable to battery has been disconnected.
CAUTION
Swirling dust due to cleaning with compressed air!
Illness of the respiratory tract.
➤ Wear breathing mask.
NOTICE
Damage to the machine can be caused by water or steam jets!
Direct water or steam jets can damage or destroy electrical components and display instru‐
ments.
➤ Cover up electrical components such as the control cabinet, generator, starter and dis‐
play instruments.
➤ Do not direct water or steam jets at sensitive components such as the display instru‐
ments.
➤ Deploy the extension pole of the pressure washer at a distance of at least 50 cm and at
an approximate 90° angle to the cooler/radiator surface.
NOTICE
Improper cleaning with hard objects!
Damage to oil cooler/coolant cooler.
➤ Do not use hard objects to clean the oil cooler/coolant cooler.
➤ Follow all instructions.
10 Maintenance
10.5 Cooler maintenance
No.: 9_9548 22 HCE
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
137