manualshive.com logo in svg

HPC MOBILAIR M27 PE, Руководство по эксплуатации, Страница: 141 / 312

Поделиться
Скачать
HPC MOBILAIR M27 PE Скачать руководство пользователя страница 141

10.4.4  Replacing the compressor oil filter

Material Spare part

Tool
Receptacle
Cleaning cloth

Precondition The machine is switched off.

The machine has been set down on level ground,

the machine is at operating temperature.
Air consumers are disconnected,

the outlet valves are open,

the machine is fully vented, the pressure gauge reads 0 bar.
Enclosure is open,

negative cable to battery has been disconnected.

CAUTION

Danger of burning from hot components and oil.
➤ Wear long-sleeved clothing and gloves.

Fig. 47 Change the oil filter

1

Oil filter

2

Direction of arrow (loosen oil filter)

3

Thermostatic valve (integrated in airend)

Changing the oil filter:

1. Prepare a receptacle.
2. Loosen oil filter (turn in direction of arrow 

 2

).

3. Remove the oil filter.
4. Catch any escaping cooling oil.
5. Carefully clean sealing surface (flange) using lint-free cloth.
6. Lightly oil the new filter's gasket.
7. Set oil filter into installation position.

10 Maintenance

10.4 Compressor Maintenance

No.: 9_9548 22 HCE

Operating Manual    Portable Rotary Screw Compressor  
MOBILAIR M27 PE  

129

Содержание MOBILAIR M27 PE

























































































































































































































































































































Отзывы:

Нет отзывов