HP ZBook 15 Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 111

background image

1.

Start Computer Setup.

2.

Use a pointing device or the arrow keys to select Main > System Information.

3.

To exit Computer Setup without saving your changes, click the Exit icon in the lower-right corner

of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Ignore Changes and Exit, and then press

enter

.

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the

AC adapter. Do not download or install a BIOS update while the computer is running on battery

power, docked in an optional USB docking device, or connected to an optional power source. During

the download and installation, follow these instructions:
Do not disconnect power on the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.

1.

Access Help and Support by selecting Start > Help and Support.

2.

Select Updates and tune-ups, and then select Check for HP updates now.

3.

At the download area, follow these steps:
a.

Identify the most recent BIOS update and compare it to the BIOS version currently installed

on your computer. Make a note of the date, name, or other identifier. You may need this

information to locate the update later, after it has been downloaded to your hard drive.

b.

Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your

hard drive where the BIOS update is downloaded. You will need to access this path when

you are ready to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the

download is complete. If no instructions are revealed, follow these steps:

1.

Select Start > Computer.

2.

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3.

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

4.

Double-click the file that has an .exe extension (for example,

filename.exe).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Using Computer Setup 85

«
...
93
94
95
96
97
...
»

Содержание ZBook 15
















































































































Отзывы:

Нет отзывов

Похожие инструкции для ZBook 15

VERSA SX HARD DISK DRIVE

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 46

Бренд: NEC Страницы: 96

Бренд: Gateway Страницы: 186

Бренд: Gateway Страницы: 114

Бренд: Gateway Страницы: 192

MX6650 - Pentium M 1.86 GHz

Бренд: Gateway Страницы: 144

Бренд: Gateway Страницы: 150

Бренд: Gateway Страницы: 8

Бренд: Gateway Страницы: 1

Бренд: Gateway Страницы: 106

TravelMate 8210

Бренд: Acer Страницы: 108

Бренд: Navilock Страницы: 2

Бренд: Monster Страницы: 74

Chromebook 14 for Work

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 86

Бренд: Acer Страницы: 79

Бренд: Acer Страницы: 81

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды