HP ZBook 15 Скачать руководство пользователя страница 56

Страница: 56 / 111

Setting password protection on wakeup

To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow

these steps:

Select Start > Control Panel > System and Security > Power Options.

In the left pane, click Require a password on wakeup.

Click Change Settings that are currently unavailable.

Click Require a password (recommended).

NOTE:

If you need to create a user account password or change your current user account

password, click Create or change your user account password, and then follow the on-screen

instructions. If you do not need to create or change a user account password, go to step 5.

Click Save changes.

Using battery power

WARNING!

To reduce potential safety issues, use only the battery provided with the computer, a

replacement battery provided by HP, or a compatible battery purchased from HP.
The computer runs on battery power whenever it is not plugged into external AC power. Computer

battery life varies, depending on power management settings, running programs, display brightness,

external devices connected to the computer, and other factors. Keeping the battery in the computer

whenever the computer is plugged into AC power charges the battery and also protects your work in

case of a power outage. If the computer contains a charged battery and is running on external AC

power, the computer automatically switches to battery power if the AC adapter is disconnected on the

computer or an AC power loss occurs.

NOTE:

When you disconnect AC power, the display brightness is automatically decreased to save

battery life. Select computer models can switch between graphic modes to increase battery life. For

more information, see

Switchable graphics (select models only) on page 52

Finding additional battery information

Help and Support provides the following tools and information about the battery:

●

Battery Check tool to test battery performance

●

Information on calibration, power management, and proper care and storage to maximize battery

life

●

Information on battery types, specifications, life cycles, and capacity

To access battery information:

▲

Select Start > Help and Support > Learn > Power Plans: Frequently Asked Questions.

Using Battery Check

Help and Support provides information on the status of the battery installed in the computer.
To run Battery Check:

46 Chapter 6 Power management

Содержание ZBook 15
















































































































Результаты поиска

Содержание ZBook 15

Отзывы:

Похожие инструкции для ZBook 15

Бренды по названию

Популярные бренды

HP ZBook 15, Руководство пользователя

Результаты поиска

Содержание ZBook 15

Отзывы:

Похожие инструкции для ZBook 15

Бренды по названию

Популярные бренды