HP Xw6600 - Workstation - 2 GB RAM, Техническое справочное руководство

Страница: 137 / 170

User Interface
Navigation
The Insight Diagnostics home page contains these tabs: Survey, Test, Status, Log, and Help. These
tabs separate the major functions of Insight Diagnostics.
Survey tab
When the Survey tab is selected, the Survey menu is displayed and enables you to view important
system configuration information. The Summary view limits the amount of data displayed, while the
Advanced view shows all the data in the selected category. Regardless of whether you choose
Advanced or Summary , the following categories of information are available on the Survey menu:
Overview —Provides a listing of general information about the computer.
All —Provides a listing of all information about the computer.
Architecture —Displays the workstation bus type and BIOS information. In addition, if the bus is PCI,
information about the PCI configuration is displayed.
Asset Control —Displays the serial number of the computer and also provides processor information.
Communication —Displays information about the computer parallel (LPT) and serial (COM) port
settings, USB, and network controller information.
Graphics —Displays information about the graphics subsystem of the computer.
Input Devices —Displays information about the type of keyboard and mouse.
Memory —Displays information about all memory in the computer, including memory on the board and
any memory modules installed.
Miscellaneous —Displays information obtained from the computers configuration memory (CMOS),
BIOS data area, Interrupt Vector table, and diagnostics component information.
Storage —Displays information about storage media connected to the computer, including all fixed
disks, diskette drives, and optical drives.
System —Displays product type, processor type and speed, coprocessor information, and information
about all ROMs in the computer.
Test tab
The Insight Diagnostics utility provides the capability to test all the major hardware components in the
workstation. You can select from several types of tests:
Quick Test —Provides a predetermined script that samples most hardware components and requires
no user intervention.
Complete Test —Provides a predetermined script during which most hardware components are fully
tested. You can select Interactive or Unattended tests. This changes the devices tested during the
Complete Test. More tests are available in the interactive mode, but these require user intervention.
Custom Test —Provides the most flexibility in controlling the testing of a system. The Custom Test mode
enables you to specifically select which devices, tests, and test parameters to run. You can select tests
that do not require any user interaction through the Interactive and Unattended test modes. More tests
are available in the interactive mode, but these tests require user intervention.
ENWW HP Insight Diagnostics Offline Edition 127