SAS RAID 1E configuration
Follow the steps below to configure an Integrated Mirroring Extended (IME) volume with the BIOS-based
configuration utility. The configuration procedure assumes that the system already has the required disk
and disk controllers.
1.
On the Main menu screen of the BIOS-based configuration utility, use the arrow keys to select an
adapter.
2.
Press
Enter
to go to the Adapter Properties screen.
3.
On the Adapter Properties screen use the arrow keys to select
RAID Properties
on the screen.
4.
Press
Enter
to go to the RAID Properties screen. Continue with Step 5 to configure a two-disk
mirrored volume. Go to Step 6 to configure a mirrored volume with three to six disks.
5.
To configure a mirrored volume with three to six disks, or three to five disks with an optional hot
spare disk:
●
In the RAID Properties screen, use the arrow keys to select the first disk for the IME volume.
●
Use the arrow keys to move to the Array Disk column for this disk, and use the
+
and
-
keys
to select
Yes
as the value.
●
When the
Keep Data/Erase Disk
message appears, press
Delete
to erase the disk.
●
Use the arrow keys to select the next disk for the IME volume. Select
Yes
as the value for the
Array Disk column.
If partitions are defined on this disk, a message warns you that data on the disk will be lost
when the mirrored volume is created. Press
Delete
to confirm erasing data from the disk, or
press any other key to deselect the disk.
●
Repeat the previous steps to select up to four more disks for the IME volume. If you want to
configure a hot spare disk for the volume, you can only select up to three more disks.
6.
(Optional) Use the arrow keys to select a hot spare disk for the IME volume. Select
Yes
as the
value for the Hot Spare column.
7.
When you have selected all disks for the IME volume, press
Esc
and select
Save changes, then
exit this menu
. If you do not want to create the IME volume, select
Discard changes, then exit
this menu
.
The IME volume exists as soon as you save the changes. The RAID Properties screen now displays
the IME volume properties and status.
Configuring SATA RAID devices
This section describes how to use the Intel Matrix Storage Manager option ROM Configuration utility to
set up and manage SATA RAID volumes.
ENWW
Configuring SATA RAID devices 137
Содержание Xw6600 - Workstation - 2 GB RAM
