background image

 

Using iLO 2  89 

feature available with the purchase of optional licenses. For more information, see "Licensing (on page 

26

)". 

The Integrated Remote Console supports four simultaneous remote console sessions with the same server if 

enabled through the Remote Console Settings screen, SMASH CLI (OEM), or RIBCL. For more information 

about using multiple remote console sessions, see the section, "Shared Remote Console (on page 

93

)." 

 

Integrated Remote Console and Integrated Remote Console Fullscreen display a menu bar and buttons 
rendered on the screen. The menu bar has the following options: 

 

Remote Console Replay (play icon)—Displays the Replay Menu dialog (if Boot/Fault Console 
Capture is enabled) or starts the Open File dialog box if Boot/Fault Console Capture is not enabled.  

o

 

Replay Current BOOT buffer and Replay Current FAULT buffer—Enables you to transfer the 
internally captured buffers to the client using the Console Replay port specified on the 

Administration>Access tab. Click 

Replay Current BOOT buffer

 or 

Replay Current FAULT buffer 

to 

change the Remote Console menu to the Replay Console menu. 

Содержание Xw460c - ProLiant - Blade Workstation












































































































































































































































Отзывы: