manualshive.com logo in svg

HP Xw460c - ProLiant - Blade Workstation, Руководство пользователя

HP Xw460c - ProLiant - Blade Workstation - это мощный рабочий станок, идеально подходящий для профессионалов. Установочный мануал и другие руководства можно бесплатно скачать с нашего веб-сайта. Посетите manualshive.com, чтобы загрузить нужные инструкции.

Поделиться
Скачать
background image

 

HPQLOMIG directory migration utility  176 

If for security reasons the user name and password cannot be in the file, then leave these fields 

blank, but keep the semicolons. 

 

Upgrading firmware on management processors 

The Upgrade Firmware screen enables you to update the management processors to the firmware version 

that supports directories. This screen also enables you to designate the location of the firmware image for 
each management processor by either entering the path or clicking 

Browse.

 

  

 

IMPORTANT:

  Binary images of the firmware for the management processors are required to 

be accessible from the system that is running the migration utility. These binary images can be 
downloaded from the HP website (

http://www.hp.com/servers/lights-out

). 

  

               

Management processor 

Minimum firmware version 

RILOE 2.50 
RILOE II 

1.10 

iLO 1.40 
iLO 2 

1.00 

 

The upgrade process might take a long time, depending on the number of management processors 

selected. The firmware upgrade of a single management processor can take as long as five minutes to 
complete. If an upgrade fails, a message appears in the Results column and HPQLOMIG continues to 

upgrade the other discovered management processors. 

  

 

IMPORTANT:

  HP recommends testing the upgrade process and verifying the results in a test 

environment before running the utility on a production network. An incomplete transfer of the 

firmware image to a management processor could result in having to locally reprogram the 

management processor using a floppy diskette. 

  

To upgrade the firmware on your management processors: 

1.

 

Select the management processors to be upgraded. 

2.

 

For each discovered management processor type, enter the correct pathname to the firmware image 
or browse to the image. 

3.

 

Click 

Upgrade Firmware. 

The selected management processors are upgraded. Although this utility 

enables you to upgrade hundreds of management processors, only 25 management processors are 

upgraded simultaneously. Network activity is considerable during this process. 

Содержание Xw460c - ProLiant - Blade Workstation












































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Xw460c - ProLiant - Blade Workstation

Supero SC836E1 - R800V(B) User Manual preview
SC836E1 - R800V(B)
Бренд: Supero Страницы: 122
StarTech.com PEX2PCIE4L Instruction Manual preview
PEX2PCIE4L
Бренд: StarTech.com Страницы: 10
HDanywhere MHUB PRO (8X8) 70 Quick Start Manual preview
MHUB PRO (8X8) 70
Бренд: HDanywhere Страницы: 2
Cubix Xpander Rackmount 8 5URP24 User Manual preview
Xpander Rackmount 8 5URP24
Бренд: Cubix Страницы: 10
National Instruments CompactDAQ cDAQ-9185 User Manual preview
CompactDAQ cDAQ-9185
Бренд: National Instruments Страницы: 140
National Instruments NI 9155 Operating Instructions And Specifications preview
NI 9155
Бренд: National Instruments Страницы: 20
National Instruments NI PXI-1050 User Manual preview
NI PXI-1050
Бренд: National Instruments Страницы: 60
TCL L28B2500-MS306D-LA Service Manual preview
L28B2500-MS306D-LA
Бренд: TCL Страницы: 39
hager UZ81S3 Mounting Instructions preview
UZ81S3
Бренд: hager Страницы: 4
Ross OG3-FR Series User Manual preview
OG3-FR Series
Бренд: Ross Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды