Troubleshooting iLO 2 191
Event log display
Event log explanation
Virtual Floppy in use by:
User
Displays when a user begins using a Virtual Floppy.
Remote Console login:
User
Displays when a user logs on a Remote Console
session.
Remote Console Closed
Displays when a Remote Console session is closed.
Failed Console login - IP Address:
IP address
Displays a failed console login and IP address.
Added User:
User
Displays when a local user is added.
User Deleted by:
User
Displays when a local user is deleted.
Modified User:
User
Displays when a local user is modified.
Browser login:
User
Displays when a valid user logs on to iLO 2 using
an Internet browser.
Browser logout: User
Displays when a valid user logs off iLO 2 using an
Internet browser.
Failed Browser login – IP Address:
IP address
Displays when a browser login attempt fails.
Remote Console login:
User
Displays when an authorized user logs on using the
Remote Console port.
Remote Console Closed
Displays when an authorized Remote Console user
is logged out or when the Remote Console port is
closed following a failed login attempt.
Failed Console login – IP Address:
IP address
Displays when an unauthorized user has
failed three login attempts using the
Remote Console port.
Added User:
User
Displays when a new entry is made to the
authorized user list.
User Deleted by:
User
Displays when an entry is removed from the
authorized user list. The User section displays the
user who requested the removal.
Event Log Cleared:
User
Displays when the user clears the Event Log.
Power Cycle (Reset):
User
Displays when the power has been reset.
Virtual Power Event:
User
Displays when the Virtual Power Button is used.
Security Override Switch Setting is On
Displays when the system is booted with the
Security Override Switch set to On.
Security Override Switch Setting
Changed to Off
Displays when the system is booted with the
Security Override Switch changed from On to Off.
On-board clock set; was previously
[NOT SET]"
Displays when the on-board clock is set. Will
display the previous time or "NOT SET" if there was
not a time setting previously.
Logs full SNMP trap alert failed for:
IP address
Displays when the logs are full and the SNMP trap
alert failed for a specified IP address.
Security disabled SNMP trap alert failed for:
IP
address
Displays when the security has been disabled and
the SNMP trap alert failed for a specified IP
address.
Security enabled SNMP trap alert failed for:
IP
address
Displays when the security has been enabled and
the SNMP trap alert failed for a specified IP
address.
