HP XP Скачать руководство пользователя страница 49

Страница: 49 / 148

4 Uninstallation Procedure

There are three ways to perform an uninstallation:

•

Run the installer.

•

Run the installer from a command prompt.

•

Use the Control Panel in Windows.

NOTE:

The following procedure uses version 04.X.X. Substitute the

exe

version to be used.("X"

is a revision number and it may be multiple digits (Ex: 04.14.10).)

To uninstall the VSS provider using the command prompt, do the following:

Open a command prompt.

Enter the installer file name.

Command prompt example:

c:\ >"HP-vssprovider-setup(04.14.x)-(x64).exe"

The setup window for VSS Provider is displayed.

Select

Remove

Click

Next

Click

Yes

on the uninstall confirmation pop-up window.

The

Files in Use screen

is displayed if there are any applications using files that need to

be updated.

Select

Automatically close and attempt to restart applications

Click

to start the uninstallation. You will receive a message letting you know when the

VSS Provider is uninstalled.

Click

Finish

Select

Start

→

Control Panel

→

Programs

→

Programs and Features

to confirm

HP XP

Storage Adapter for Microsoft® Volume ShadowCopy Service(x64)

has been removed.

NOTE:

The installation folder of VSS Provider including log files and setup files are not removed

during the uninstallation. Remove the folder as needed.

To uninstall the VSS provider using an installer, do the following:

Double-click the installer to start the installation wizard.

The setup window for VSS Provider is displayed.

Select

Remove

Click

Next

Click

Yes

on the uninstall confirmation pop-up window.

The

Files in Use screen

is displayed if there are any applications using files that need to

be updated.

Select

Automatically close and attempt to restart applications

Click

to start the uninstallation. You will receive a message letting you know when the

VSS Provider is uninstalled.

Click

Finish

Select

Start

→

Control Panel

→

Programs

→

Programs and Features

to confirm

HP XP

Storage Adapter for Microsoft® Volume ShadowCopy Service(x64)

has been removed.

NOTE:

The installation folder of VSS Provider including log files and setup files are not removed

during the uninstallation. Remove the folder as needed.

Содержание XP





















































































































































Результаты поиска

Содержание XP

Отзывы:

Похожие инструкции для XP

Бренды по названию

Популярные бренды

HP XP, Руководство пользователя

Результаты поиска

Содержание XP

Отзывы:

Похожие инструкции для XP

Бренды по названию

Популярные бренды